29th
September
by
Roland | Posted in
Helpful Tip Tuesday 1 Comment »
Want to get a seamless look on your Faux Panels. Check out this small guide to help you. You will need a Touch up kit that is made for your specific panel.
 |
1.Caulk the sides of the panel. |
 |
2. Some caulk should squeeze out of the seam. |
 |
3. Remove any excess caulk using a paper towel. |
 |
4.Using a wet paint brush, smooth the remaining caulk into the panels, then let dry. |
 |
5. Now you will need to use the touch-up paint that is made for your panel. |
 |
6. Using the touch up paint, color in the remaining caulk, allow time to dry. |
 |
7. When dry the panels should appear almost seamless. |
|
|
|
Tags: caulk, color, faux, kit, paint, panel, Panels, seam, touch, up
This entry was posted
on Tuesday, September 29th, 2009 at 4:11 PM and is filed under Helpful Tip Tuesday.
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.
October 15th, 2009 at 4:08 PM
gr8 resrch bro