| Q. |
How much are the panels? |
| A. |
You can find all the prices on the corresponding panel pages:
|
| |
| Q. |
What are your Regency Panels made of? |
| A. |
Regency Panels are a molded, polyurethane rock, stone, and brick exterior cladding product. |
| |
| Q. |
Do you offer a warranty on your panels? |
| A. |
Yes, we offer a 15-year limited warranty. Click here to read it.
| 15-YEAR LIMITED WARRANTY FOR FAUX PANELS
Barron Designs Inc. (dba FauxPanels.com) warrantees all Faux panels to withstand normal outdoor conditions for fifteen years. Barron Designs (dba FauxPanels.com) warrantees the Faux Panels will not peel, crack, split, or rot.
Barron Designs (dba FauxPanels.com) warrantees against all manufactures defects (Barron Designs must be notified within 30 days of purchase if a manufacture defects was found. Damage resulting from accident, alteration, misuse, abuse, fire, improper installation, improper maintenance, acts of God, or use of products not approved by Barron Designs Inc shall not be covered under the warrantee. Barron Designs Faux Panels are treated with a coating of a U.V. finish. This prevents and/or slows down sun fading, but like anything left in the sun, some slight fading could occur. Barron Designs does not warranty against this sun fading.
When Barron Designs has determined that a Faux Panel is defective, it will replace the product or a credit may be offered instead of replacement (at Barron Designs' discretion). Barron Designs' liability is limited to the cost of the defective product.
This warranty expressly excludes the following:
- Harmful chemicals
- Misuse or abuse
- Fire or flood
- Vandalism
- Distorting and warping from excessive heat
- Mold and Mildew accumulation
- Damage from shipping and Handling
- Lightning, hurricane, tornado, windstorm, earthquake, or any other acts of god
- Animal or birds
- Color changes due to normal weathering including sunlight
- Falling objects or impact of foreign objects
- Damage from improper installation
|
|
| |
| Q. |
How much does it cost? |
| A. |
The Regency Line costs about 20% less than cast or cultured products especially so when you factor in not needing to hire a stone mason to do the installation. By the time the mason is making the first cut, our Regency Panels job would be half done... |
| |
| Q. |
How do I place an order? |
| A. |
We are as close as a mouse click away. We do not have “local distributors”. You can buy direct from us over the web. No middle man. We ship UPS to your door for convenience. Even samples!
Samples are shipped UPS as well and are generally shipped out within a business day or two from placing your order for the samples. Samples are fully rebatable and available on Samples page. |
| |
|
| Q. |
Are the samples rebatable? |
| A. |
Yes, the samples are fully rebatable. Only one coupon per order may be used. |
| |
|
| Q. |
How do I cash in my sample order rebate? |
| A. |
 We will include a coupon for you to use on your next online order.
The coupon will have a code for you to use for your next order in your shopping cart.
In order for you to use coupon, your order subtotal must be greater than coupon amount. |
| |
| Q. |
What applications would be best suited for Regency Panels? |
| A. |
Regency Panels are perfect for commercial or residential applications. They can also be used or interior or exterior use. Check with local building codes for interior usage for fire code requirements. |
| |
| Q. |
What are Regency Panels made of? |
| A. |
High density polyurethane. It’s strong, waterproof and very durable. |
| |
| Q. |
How is it made? |
| A. |
Molds are made using real rock, stone, and brick as the master mold then, using a proprietary process, liquid polyurethane is introduced into the mold forming the exact clone of the original. Regency uses a multiple-mold system to ensure a natural look throughout the product line. |
| |
| Q. |
Where is your corporate office? |
| A. |
Deer Park, NY. Click here to contact us. |
| |
| Q. |
How many styles are there? |
| A. |
There are 3 styles. Random Rock, Stacked Stone, and Brick. |
| |
| Q. |
Are there colors to choose from? |
| A. |
Yes. Both Random Rock and Stacked Stone have 5 color options, Brick 2. |
| |
| Q. |
What are the 4 parts to the system? |
| A. |
Panels, Corners, Ledgers and Trim. |
| |
| Q. |
How much does it cost? |
| A. |
About 20% less than all other similar types masonry products. |
| |
| Q. |
Is it really easier to repair than other cast products? |
| A. |
A dab of color matched caulk and blending it in with your fingertip takes care of most repairs. |
| |
| Q. |
Will I need special tools to install Regency Panels? |
| A. |
No. Just the typical tools found in the average home shop should be enough to handle most home projects. |
| |
| Q. |
How do I know how much caulking to use? |
| A. |
It is recommended to order 1 tube per 4 panels. |
| |
| Q. |
Are Regency Panels easy to install? |
| A. |
Yes. Regency Panels are a mortar-free product that can be easily installed with one or two people using basic hand or power tools. Regency Panels have 4-5 molds per panel. This prevents the "repeat" look. This gives the look of authentic stone. It is recommended that time is spent to layout your panel design to give the look you are trying to achieve. |
| |
| Q. |
What preparation and substrate is needed to install Regency Panels? |
| A. |
Regency Panels only require a clean, dry sub-straight, such as OSB, plywood, concrete or existing siding providing the surface is flat such as RB&B, Textured 1-11 or any other flat surface. |
| |
| Q. |
What sizes are available? |
| A. |
Regency Panels are sold in 2’×4’ panels, as well as corner pieces, trim and ledgers. Panels cover between 7-8 square feet depending upon the style. Our accessories are molded from authentic stone or brick to give the authentic look you are seeking. |
| |
| Q. |
What if I don't want to install myself? |
| A. |
Anyone with basic understanding of carpentry can easily install Regency Panels. Click here to learn how to install. |
| |
| Q. |
Are Regency Panels easy to clean? |
| A. |
Regency Panels may easily be cleaned with a standard garden hose or can be wiped down with a damp rag. |
| |
| Q. |
Does the product have an R value? |
| A. |
Yes. Regency Panels provide a significant insulation value to all application. Our panels are made from a high density two part polyurethane which provides R value of 3.6 per inch or greater depending on the product type. |
| |
| Q. |
What does the product weigh? |
| A. |
Regency Panels weigh approximately one pound per square foot making it easy for one person to handle and install, also eliminating the need for lift equipment and extra labor. |
| |
| Q. |
What applications would be best suited for Regency Panels? |
| A. |
Regency Panels are perfect for commercial, industrial or residential, exterior applications. Check with local building codes for interior usage for fire code requirements. Regency Panels are unrated with Class 1 panels available with a minimum requirement of 2500 square feet at an additional cost and extended lead times. |
| |
| Q. |
What maintenance is required? |
| A. |
Regency Panels require no maintenance. |
| |
| Q. |
Do I have to waterproof Regency Panels? |
| A. |
No, Regency Panels quality is not affected by moisture or salt water. |
| |
|
| Q. |
Can I use your Faux Stone Panels in my shower? |
| A. |
 Yes, our panels are completely water proof and durable. |
| |
|
| Q. |
Can I use your faux stone panels as a skirting around my house? |
| A. |
Yes, Our faux panels install fast and are durable.
|
| |
Oxford Panels
Oxford Panels
