Butting a Corner Joint
 |
- First, attach the molded FauxPanels™ corner to the wall by applying glue to the backside of the corner and screwing it into the wall using drywall screws.
- Next, align a FauxPanels™ standard panel (or trim an interlock panel) to the molded corner.
- Continue as explained in Basic Instructions.
|
MAKE SURE to observe and obey all safety rules and recommendations set forth by tool manufacturers
and local,
state, and federal authorities for any building project including all applicable building codes.
2703 since April 1, 2008 |
|
Oxford Panels
Oxford Panels
