Skirting for Mobile Homes – Faux Panels® Installation

Download this page as a printable PDF

Tools and Supplies You'll Need

  1. Skirting-Mates
  2. Tape Measure
  3. Exterior-grade plywood
  4. Saw for cutting plywood
  5. Exterior grade screws
  6. Screw gun with the appropriate tip for the screws being used
  7. Hammer
  8. Level

Directions:

The following are directions on how to install Faux Panels® as skirting.

1.) Clear the area under your home in preparation for installation of the mobile home skirting-mates.

2.) Install the skirting-mate. Follow the detailed instructions that come with the skirting-mates.

3.) Measure the area and cut exterior grade plywood to fit.

4.) Begin applying exterior-grade plywood to the skirting-mates. We recommend using exterior grade screws for this.

5.) Following the basic panel installation directions, begin applying panels to the plywood.

6.) As always, inspect the entire job to be sure you have filled all gaps and screw holes with the appropriate caulk.

7.) Stand back and enjoy your beautiful work.

MAKE SURE to observe and obey all safety rules and recommendations set forth by tool manufacturers and local, state, and federal authorities for any building project including all applicable building codes.




How helpful was this page?
Your rating:
| | | | |
Your comments (optional):
Your e-mail (optional):
(Privacy Policy)

Too hard to read? Click to refresh.
Enter text from picture above: