We recently received our order, and I was pleasantly and impressed with the quality of your product. I ordered the Norwich Colorado stacked stone in the Earth color and the product and color is perfect, exactly what I expected. Attached is a picture of our gorgeous new room.
Thank you for making a durable and beautiful product that is easy to install and looks fabulous.
I have been meaning to get these photos to you for the past couple of months. Needless to say we are very pleased the way the stone work turned out. We designed and built the artwork over the baptistery. Its 1/2” computer routed acrylic edge lit with LED lights. I figured you might like to see our innovation on the stone work in front of the pulpit.
I accomplished this by vertically routing the back of the panels on 3” center with a ½” wide route line. I cut the panel within about 1/8” of the rear stone surface – in other words about ½ way through the panel without cutting through the lowest part of the stone joints. This way I was bend about 1" of material instead of 2". Then I put the panels in the warming oven in the church kitchen (don’t tell the ladies) for about 30 minutes. The oven only goes to 180 degrees and I believe the panels were probably 110 – 120 degrees when I bent them. I bent them by securing the female end of the panel again the floor at the wall and then just applying gradual pressure. They bent easy with no distortion. Thanks for your produce.
To whom it may concern,
We have received our cobblestone panels in good shape and they are the perfect color and match the rest of the house. Thanks to your informational web site it was easy to order and the fast delivery was great! Would recommend your site to whom ever would ask where we found our cobblestone.
Thank you again.
Thank you for being a part of something great and joining us in changing lives!
I recently purchased and installed Nailon Stone Wall Plus Lewinston Crest Panels and would like to share my experience. We have a newly built home and in our community we are required to have no exposed basements walls. Rather than pay the $18,500 that our builder wanted to install a stone veneer, I independently went with another option with a much lower cost. Stone Panels.
This product was better than advertised! Installation was a breeze, and I am what you might say is a “do it your selfer” with no construction or carpentry experience. We had NO issues or setbacks during the installation. Cutting was easy (table saw). Everything locked in perfectly and the panels look great. Installation took a total of 3 work days for approximately 400 square feet of installation. We have had several compliments already and everyone says it looks just like real stone. The color is amazing, our house looks that much better, I saved a LOT of money with little effort and we could not be happier.
I loved working with your product designing this room. It was such an easy way to transform a 2nd floor loft in our studio into something extraordinary. It’s made for a beautiful set here at FOX5 in Las Vegas and our celebrity artists are blown away by what they see.
Thanks for all of your help and great customer service!
We really love the new appearance your panels made to the front of our house. So far all we have heard is comments on how great the job looks. It isn't perfect as I am not a carpenter but took my time and was very pleased with the out come.
Thanks for your assistance with the project.
I have attached before and after pictures of a small project that I did using your Novi dry stack siding panels. My basement wall had in its past had some oily residue from either a wood preservative or some type of insecticide placed on its surface. This prevented any type of masonry coating from adhering to the surface.
After many attempts at painting or coating this wall over the years I decided to try putting a Faux stone face on this wall. After an internet search I found your website and have been very happy with your products and the customer service that I received from your staff. These panels were installed by using treated firing strips Tapconned onto the wall. This job went well with satisfying results, and should last for years.